Drying Process of Seedless Watermelon Seeds Using Tray Dryer
Authors
Siswoyo Soekarno , Indarto Indarto , Amal Bahariawan , Agus Dharmawan , Achmad Ivo Joan Pamungkas , Nova Sulung ArjasariDOI:
10.29303/jrpb.v12i1.580Published:
2024-03-27Issue:
Vol. 12 No. 1 (2024): Jurnal Ilmiah Rekayasa Pertanian dan BiosistemKeywords:
heat, seedless watermelon seeds, tray dryerArticles
Downloads
How to Cite
Downloads
Abstract
The study aimed to design and assess the heat flow capability of a tray dryer to support the process of supplying seedless watermelon seeds. Researchers collaborated with farmers in Seputih Mayang Village, Jember, who partnered with seeds producer of PT East West Seed Indonesia. Drying with a tray dryer that is composed of a frame, plywood walls, heating source, air exhaust cavity, shelves, thermostat, blower, and digital temperature measuring device; heat circulation moves in a zigzag manner. Determination of heat in drying by measuring temperature changes on each shelf. Shelf 1 (bottom) received the most significant heat than the upper shelves. To reduce the moisture content by 12%, the drying machine consumes 2.272 kWh of energy or equivalent to 8179.5 kJ, while the heat released during drying is 1603.800 kJ. Thus, the efficiency of the drying machine is 19.59%.
References
Anjarsari, N. S. 2020. Perbandingan Sifat Fisikokimia Tepung Jamur Tiram Hasil Pengeringan Dengan Mesin Rotary Vacuum Dryer Sistem Batch Pada Dua Daya Water Jet Pump Berbeda. Politeknik Negeri Jember. https://sipora.polije.ac.id/id/eprint/958.
Alit, I. B. dan I. G. B. Susana. 2020. Pengaruh kecepatan udara pada alat pengering jagung dengan mekanisme penukar kalor. Jurnal Rekayasa Mesin. 11(1):77-84. https://doi.org/10.21776/ub.jrm.2020.011.01.9. DOI: https://doi.org/10.21776/ub.jrm.2020.011.01.9
Asrianto, A., Jamaluddin, J., & Kadirman, K. (2018). Modifikasi Mesin Pengering Biji-Bijian dengan Bahan Bakar Tempurung Kelapa. Jurnal Pendidikan Teknologi Pertanian, 4, 222–231. https://doi.org/10.26858/jptp.v4i0.7126. DOI: https://doi.org/10.26858/jptp.v4i0.7126
Gunawan, I. (2014). Analisis Pendapatan Usahatani Semangka (Citrullus Vulgaris) Di Desa Rambah Muda Kecamatan Rambah Hilir Kabupaten Rokan Hulu. Jurnal Sungkai, 2(1). https://doi.org/10.30606/js.v2i1.469.
Islam, H. I., N. Nabilah, S. S. Atsaurry, D. H. Saputra, G. M. Pradipta, A. Kurniawan, dan H. Syafutra. 2016. Sistem kendali suhu dan pemantauan kelembaban udara ruangan berbasis arduino uno dengan menggunakan sensor dht22 dan passive infrared (pir). Prosiding Seminar Nasional Fisika (E-Journal). Vol 5: 1-6. doi: https://doi.org/10.21009/0305020123. DOI: https://doi.org/10.21009/0305020123
Lubis, W., Karim, A., & Nasution, J. (2021). Limbah Kulit Buah Semangka (Citrullus lanatus) sebagai Bahan Baku Pembuatan Nata. Jurnal Ilmiah Biologi UMA (JIBIOMA), 3(2), 49–55. https://doi.org/10.31289/jibioma.v3i2.736. DOI: https://doi.org/10.31289/jibioma.v3i2.736
Mulkan, A. dan T. Zulfadli. 2021. Pengaruh penggunaan blower pada kolektor surya sebagai alat alternatif untuk meningkatkan kualitas hasil pengeringan biji kopi di daerah Aceh. Jurnal Polimesin. 19(1) :35-39. doi: https://dx.doi.org/10.30811/jpl.v19i1.2023 DOI: https://doi.org/10.30811/jpl.v19i1.2023
Nabila, T. I. (2022). Penanganan Pengeringan dan Pergudangan Bahan Baku Jagung untuk Pakan Unggas. Jurnal Nutrisi Ternak Tropis dan Ilmu Pakan, 4(1), 27-33. https://doi.org/10.24198/jnttip.v4i1.37575 DOI: https://doi.org/10.24198/jnttip.v4i1.37575
Nugrahini, T. 2015. Viabilitas Dan Pertumbuhan Benih Semangka Non Biji ( Citrullus Vulgaris Schard ) Terhadap Pengaruh Suhu Dan Biji Tergolong Tinggi Sehingga Tidak Jarang Sangat Mahal , Sehingga Untuk Mengatasi Samarinda , Pada Bulan Maret-Juni Amplas , Ayakan , Bola Lampu. Jurnal Agrifor. XIV(1):141–146. https://doi.org/10.31293/af.v14i1.1113.
Nur, S., Latief, M. F., Yamin, A. A., & Syamsu, J. A. (2022). Kualitas fisik hasil pengeringan jagung sebagai bahan pakan menggunakan mesin vertical dryer. Agribios, 20(2),171-178. https://doi.org/10.36841/agribios.v20i2.2280. DOI: https://doi.org/10.36841/agribios.v20i2.2280
Puspasari, F., T. P. Satya, U. Y. Oktiawati, I. Fahrurrozi, dan H. Prisyanti. 2020. Analisis akurasi sistem sensor dht22 berbasis arduino terhadap thermohygro meter standar. 1-6.
https://doi.org/10.12962/j24604682.v16i1.5776. DOI: https://doi.org/10.12962/j24604682.v16i1.5776
Rahayuningtyas, A. dan S. I. Kuala. 2016. Pengaruh suhu dan kelembaban udara pada proses pengeringan singkong (studi kasus: pengeringan tipe rak). ETHOS (Jurnal Penelitian dan Pengabdian Masyarakat). 4(1): 99-104. doi: https://doi.org/10.29313/ethos.v0i0.1663. DOI: https://doi.org/10.29313/ethos.v0i0.1663
Rahmanto, R. H. dan R. B. S. Majanasastra. 2019. Analisis pengaruh variasi kecepatan putaran blower terhadap kinerja kolektor panas tenaga surya pelat tembaga dengan sekat vertikal. Jurnal Ilmiah Teknik Mesin. 7(1): 40-47. doi: https://doi.org/10.33558/jitm.v7i1.1903 DOI: https://doi.org/10.33558/jitm.v7i1.1903
Syafrida, M., Darmanti, S., & Izzati, M. (2018). Pengaruh Suhu Pengeringan Terhadap Kadar Air, Kadar Flavonoid Dan Aktivitas Antioksidan Daun Dan Umbi Rumput Teki (Cyperus Rotundus L). Bioma: Berkala Ilmiah Biologi, 20(1), 44-50.
https://doi.org/10.14710/bioma.20.1.44-50. DOI: https://doi.org/10.14710/bioma.20.1.44-50
Syahrul. S, R. Romdhani, dan M. Mirmanto. 2016. Pengaruh variasi kecepatan udara dan massa bahan terhadap waktu pengeringan jagung pada alat fluidized bed. Dinamika Teknik Mesin. 6(2):119-126. https://doi.org/10.29303/d.v6i2.15 DOI: https://doi.org/10.29303/d.v6i2.15
Soekarno, S., Nadzirah, R., Indarto, Lestari, Ning Puji , Bahariawan, A., dan Karimah, N. 2023. Pengendalian Suhu Ruang Pada Mesin Pengering Vertikal Tipe Rak (Vertical Tray Dryer) Dalam Pengeringan Biji Jagung (Zea Mays L.), Jurnal Rekayasa Pertanian dan Biosistem, 11(1), 113-124. https://doi.org/10.29303/jrpb.v11i1.454. DOI: https://doi.org/10.29303/jrpb.v11i1.454
Sunarlim, N., Zam, S. I., & Purwanto, J. (2012). Pelukaan Benih dan Perendaman dengan Atonik pada perkecambahan Benih dan pertumbuhan Tanaman semangka non-Biji (Citrullus vulgaris Schard L.). Jurnal Agroteknologi, 2(2), 21–24. http://doi.org/10.24014/ja.v2i2.124.
Suwati S. Romansyah E. Syarifudin . Jani. Y. Purnomo. H. A, Damar. D. and E. Y. 2021. Comparisonbetween Natural And Cabinet Drying On Weight Loss Of Seaweed Euchuema Cottonii Weber-Van Bosse. Agricultural Productivity and Sustainability Improvement in Tropical Region Comparison. https://doi.org/10.17582/journal.sja/2021/37.s1.01.08. DOI: https://doi.org/10.17582/journal.sja/2021/37.s1.01.08
Ufie, R. 2021. Kaji eksperimental pemanfaatan kalor buangan kondensor untuk kebutuhan pengeringan. ALE Proceeding. 1(April):102–107. https://doi.org/10.30598/ale.1.2018.102-107. DOI: https://doi.org/10.30598/ale.1.2018.102-107
Widiaswanti, E., R. Yunitarini., T. Novianti,, dan A. Kartiningsih.. 2023. Investigasi kajian kinetik pengeringan jahe dalam pembuatan simplisia. Jurnal Serambi Engineering. 8(1): 4413-4421. doi: https://doi.org/10.32672/jse.v8i1.5141 .
License
Copyright (c) 2024 Siswoyo Soekarno
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License 4.0 International License (CC-BY-SA License). This license allows authors to use all articles, data sets, graphics, and appendices in data mining applications, search engines, web sites, blogs, and other platforms by providing an appropriate reference. The journal allows the author(s) to hold the copyright without restrictions and will retain publishing rights without restrictions.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in Jurnal Ilmiah Rekayasa Pertanian dan Biosistem (JRPB).
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).